High Precision GNSS Time Synchronizer with OCXO Holdover | GPS Timing Box CL-1022

The CL-1022 GNSS Time Synchronizer integrates a high-accuracy GPS timing receiver and a stable OCXO oscillator.
With an adaptive holdover algorithm, it maintains 1PPS timing accuracy within ±1.5 μs for 24 hours even without GNSS signal.
Ideal for telecom, data centers, and network synchronization systems.

Introduction

CL-1022 is a GPS timing box that integrates a high accuracy GPS time receiver module and a highly stable OCXO crystal oscillator.
It adopts an adaptive tracking holdover algorithm, automatically compensates for drifts such as OCXO temperature and aging, and achieves a powerful holdover capability of 24-hour 1PPS       deviation of less than 1.5us. It also adopts advanced BootLoader computer network transmission technology, which allows software to be remotely upgraded to provide updated functions and improved services.

Specifications

SYNC OUT Port

  • 1PPS Output, Pulse Width 100ms
  • TOD Output, Optional Protocol
  • Control signal, Optional Protocol

Time Output

  • Standard: Stratum 2 (ITU-T G.812: type II)
  • Accuracy: <1E-12 (Average over 24 hrs GNSS lock)
  • Holdover Accuracy: <2E-11 (24 hrs after GNSS off, ΔT =5°C, Holdover capability ≤1.5us)

Power Supply

  • Power Supply: -48V DC, AC/DC adapter is optional
  • Power consumption: ≤15W

Environmental

  • Operating Temperature: -20°C~60°C
  • Storage Temperature: -40°C~85°C
  • Humidity: <95% non-condensing

Mechanical Dimensions

  • 150mm(W)x30mm(H)x200mm(D), other sizes are optiona.
Features

  • Type: Auto Survey-in High Timing Accuracy
  • Receiver: 70 channels
  • Frequency Band: L1 (1575.42MHz )
  • Tracking Capability: 12 Satellites
  • Sensitivity: Tracking/Navigation -160dBm
  • Re-acquisition -155dBm
  • Acquisition cold start -145dBm
  • Timing Accuracy: RMS 20ns , 99% < 60ns, Compensated 15ns
  • GPS Antenna: Active
SYNC OUT Port

● 1PPS Output, Pulse Width 100ms
● TOD Output, Optional Protocol
● Control signal, Optional Protocol

Time Output

● Standard: Stratum 2 (ITU-T G.812: type II)
● Accuracy: <1E-12 (Average over 24 hrs GNSS lock)
● Holdover Accuracy: <2E-11 (24 hrs after GNSS
off, ΔT =5°C, Holdover capability ≤1.5us)

Power Supply

● Power Supply: -48V DC, AC/DC adapter is optional
● Power consumption: ≤15W

Environmental

● Operating Temperature: -20°C~60°C
● Storage Temperature: -40°C~85°C
● Humidity: <95% non-condensing

Mechanical Dimensions

● 150mm(W)x30mm(H)x200mm(D), other sizes are optiona

Reviews

There are no reviews yet.

Be the first to review “High Precision GNSS Time Synchronizer with OCXO Holdover | GPS Timing Box CL-1022”

Your email address will not be published. Required fields are marked *